The Ev class

(PECL ev >= 0.2.0)

Einführung

Ev is a static class providing access to the default loop and to some common operations.

Klassenbeschreibung

final Ev {

/* Constants */

const integer FLAG_AUTO = 0 ;

const integer FLAG_NOENV = 16777216 ;

const integer FLAG_FORKCHECK = 33554432 ;

const integer FLAG_NOINOTIFY = 1048576 ;

const integer FLAG_SIGNALFD = 2097152 ;

const integer FLAG_NOSIGMASK = 4194304 ;

const integer RUN_NOWAIT = 1 ;

const integer RUN_ONCE = 2 ;

const integer BREAK_CANCEL = 0 ;

const integer BREAK_ONE = 1 ;

const integer BREAK_ALL = 2 ;

const integer MINPRI = -2 ;

const integer MAXPRI = 2 ;

const integer READ = 1 ;

const integer WRITE = 2 ;

const integer TIMER = 256 ;

const integer PERIODIC = 512 ;

const integer SIGNAL = 1024 ;

const integer CHILD = 2048 ;

const integer STAT = 4096 ;

const integer IDLE = 8192 ;

const integer PREPARE = 16384 ;

const integer CHECK = 32768 ;

const integer EMBED = 65536 ;

const integer CUSTOM = 16777216 ;

const integer ERROR = 2147483648 ;

const integer BACKEND_SELECT = 1 ;

const integer BACKEND_POLL = 2 ;

const integer BACKEND_EPOLL = 4 ;

const integer BACKEND_KQUEUE = 8 ;

const integer BACKEND_DEVPOLL = 16 ;

const integer BACKEND_PORT = 32 ;

const integer BACKEND_ALL = 63 ;

const integer BACKEND_MASK = 65535 ;

/* Methoden */

final public static int backend ( void )

final public static int depth ( void )

final public static void embeddableBackends ( void )

final public static void feedSignal ( int $signum )

final public static void feedSignalEvent ( int $signum )

final public static int iteration ( void )

final public static double now ( void )

final public static void nowUpdate ( void )

final public static void recommendedBackends ( void )

final public static void resume ( void )

final public static void run ([ int $flags ] )

final public static void sleep ( double $seconds )

final public static void stop ([ int $how ] )

final public static void supportedBackends ( void )

final public static void suspend ( void )

final public static double time ( void )

final public static void verify ( void )

}

Vordefinierte Konstanten

Flags passed to create a loop:

Ev::FLAG_AUTO

The default flags value

Ev::FLAG_NOENV

If this flag used(or the program runs setuid or setgid), libev won't look at the environment variable LIBEV_FLAGS . Otherwise(by default), LIBEV_FLAGS will override the flags completely if it is found. Useful for performance tests and searching for bugs.

Ev::FLAG_FORKCHECK

Makes libev check for a fork in each iteration, instead of calling EvLoop::fork() manually. This works by calling getpid() on every iteration of the loop, and thus this might slow down the event loop with lots of loop iterations, but usually is not noticeable. This flag setting cannot be overridden or specified in the LIBEV_FLAGS environment variable.

Ev::FLAG_NOINOTIFY

When this flag is specified, libev won't attempt to use the inotify API for its » ev_stat watchers. The flag can be useful to conserve inotify file descriptors, as otherwise each loop using ev_stat watchers consumes one inotify handle.

Ev::FLAG_SIGNALFD

When this flag is specified, libev will attempt to use the signalfd API for its » ev_signal (and » ev_child ) watchers. This API delivers signals synchronously, which makes it both faster and might make it possible to get the queued signal data. It can also simplify signal handling with threads, as long as signals are properly blocked in threads. Signalfd will not be used by default.

Ev::FLAG_NOSIGMASK

When this flag is specified, libev will avoid to modify the signal mask. Specifically, this means having to make sure signals are unblocked before receiving them.

This behaviour is useful for custom signal handling, or handling signals only in specific threads.

Flags passed to Ev::run() , or EvLoop::run()

Ev::RUN_NOWAIT: Means that event loop will look for new events, will handle those events and any already outstanding ones, but will not wait and block the process in case there are no events and will return after one iteration of the loop. This is sometimes useful to poll and handle new events while doing lengthy calculations, to keep the program responsive.
Ev::RUN_ONCE: Means that event loop will look for new events (waiting if necessary) and will handle those and any already outstanding ones. It will block the process until at least one new event arrives (which could be an event internal to libev itself, so there is no guarantee that a user-registered callback will be called), and will return after one iteration of the loop.

Flags passed to Ev::stop() , or EvLoop::stop()

Ev::BREAK_CANCEL: Cancel the break operation.
Ev::BREAK_ONE: Makes the innermost Ev::run() (or EvLoop::run() ) call return.
Ev::BREAK_ALL: Makes all nested Ev::run() (or EvLoop::run() ) calls return.

Watcher priorities:

Ev::MINPRI: Minimum allowed watcher priority.
Ev::MAXPRI: Maximum allowed watcher priority.

Bit masks of (received) events:

Ev::READ: The file descriptor in the EvIo watcher has become readable.
Ev::WRITE: The file descriptor in the EvIo watcher has become writable.
Ev::TIMER: EvTimer watcher has been timed out.
Ev::PERIODIC: EvPeriodic watcher has been timed out.
Ev::SIGNAL: A signal specified in EvSignal::__construct() has been received.
Ev::CHILD: The pid specified in EvChild::__construct() has received a status change.
Ev::STAT: The path specified in EvStat watcher changed its attributes.
Ev::IDLE: EvIdle watcher works when there is nothing to do with other watchers.
Ev::PREPARE: All EvPrepare watchers are invoked just before Ev::run() starts. Thus, EvPrepare watchers are the last watchers invoked before the event loop sleeps or polls for new events.
Ev::CHECK: All EvCheck watchers are queued just after Ev::run() has gathered the new events, but before it queues any callbacks for any received events. Thus, EvCheck watchers will be invoked before any other watchers of the same or lower priority within an event loop iteration.
Ev::EMBED: The embedded event loop specified in the EvEmbed watcher needs attention.
Ev::CUSTOM: Not ever sent(or otherwise used) by libev itself, but can be freely used by libev users to signal watchers (e.g. via EvWatcher::feed() ).
Ev::ERROR: An unspecified error has occurred, the watcher has been stopped. This might happen because the watcher could not be properly started because libev ran out of memory, a file descriptor was found to be closed or any other problem. Libev considers these application bugs. See also » ANATOMY OF A WATCHER

Backend flags:

Ev::BACKEND_SELECT: select(2) backend
Ev::BACKEND_POLL: poll(2) backend
Ev::BACKEND_EPOLL: Linux-specific epoll(7) backend for both pre- and post-2.6.9 kernels
Ev::BACKEND_KQUEUE: kqueue backend used on most BSD systems. EvEmbed watcher could be used to embed one loop(with kqueue backend) into another. For instance, one can try to create an event loop with kqueue backend and use it for sockets only.
Ev::BACKEND_DEVPOLL: Solaris 8 backend. This is not implemented yet.
Ev::BACKEND_PORT: Solaris 10 event port mechanism with a good scaling.
Ev::BACKEND_ALL: Try all backends(even currupted ones). It's not recommended to use it explicitly. Bitwise operators should be applied here(e.g. Ev::BACKEND_ALL & ~ Ev::BACKEND_KQUEUE ) Use Ev::recommendedBackends() , or don't specify any backends at all.
Ev::BACKEND_MASK: Not a backend, but a mask to select all backend bits from flags value to mask out any backends(e.g. when modifying the LIBEV_FLAGS environment variable).

Hinweis:
For the default loop during module initialization phase Ev registers » ev_loop_fork call by means of pthread_atfork (if available).

Hinweis:
There are methods providing access to the default event loop in Ev class(e.g. Ev::iteration() , Ev::depth() etc.) For custom loops (created with EvLoop::__construct() ) these values may be accessed via corresponding properties and methods of the EvLoop class.

The instance of the default event loop itself can be fetched by means of EvLoop::defaultLoop() method.

Inhaltsverzeichnis

Ev::backend — Returns an integer describing the backend used by libev.
Ev::depth — Returns recursion depth
Ev::embeddableBackends — Returns the set of backends that are embeddable in other event loops.
Ev::feedSignal — Feed a signal event info Ev
Ev::feedSignalEvent — Feed signal event into the default loop
Ev::iteration — Return the number of times the default event loop has polled for new events.
Ev::now — Returns the time when the last iteration of the default event loop has started.
Ev::nowUpdate — Establishes the current time by querying the kernel, updating the time returned by Ev::now in the progress.
Ev::recommendedBackends — Returns a bit mask of recommended backends for current platform.
Ev::resume — Resume previously suspended default event loop
Ev::run — Begin checking for events and calling callbacks for the default loop
Ev::sleep — Block the process for the given number of seconds.
Ev::stop — Stops the default event loop
Ev::supportedBackends — Returns the set of backends supported by current libev configuration.
Ev::suspend — Suspend the default event loop
Ev::time — Returns the current time in fractional seconds since the epoch.
Ev::verify — Performs internal consistency checks(for debugging)